Inside the tank are two bolts holding the tank on to the base. Unscrew these two bolts and carefully lift water conditioner the tank from the base. Remove tank to the trash.
If you find that the water line repair leak is in the supply line you will need to replace it or simply tighten it. Start by turning the water supply off and then flushing the toilet to get rid of the excess water. Now use the towels to dry the area so that it is easier for you to fix the leak. Use a wrench to loosen the hexagonal nuts on the supply line at the main end as well as the one which goes to the flush tank. Now use the replacement supply line which you have and tighten the bolt at the supply end first. Now adjust the length that you will need for the pipe to reach the flush tank. Once you adjust the length use a knife to cut the extra length and then tighten the hexagonal bolt at the other end.
17. Do you know that if a severe gale warning is given, the mean wind speed is expected to reach force 9 (41knots)? Do you know what imminent, soon, and later mean; what the definition of the various of states of visibility are, and do you understand what slowly, steadily and rapidly mean in relation to pressure system movements? I have a simple handout with all the useful expressions.
Getting advice from someone who has not made any money online is like asking a plumber to shoe a horse when they have never done so. Why in the world would you do this?
Keep an eye on any leaks in and around the house. Inspect taps, pipes and your roof regularly. Watch for leaks and if you find them, get it water line repair as soon as possible.
There are a lot of different shapes and styles of toilets but, with a few exceptions, they all work about the same. Water is released from the tank (many commercial toilets use a special valve instead of a tank) into the bowl to flush the waste into your drainage piping. Basically pretty simple, right?
Is your garbage disposal clogged, but it is turning ok? This may be due to a blockage in the pipe. If you look at the pipe work under your sink you will see that the disposal is connected to a pipe that should join to a U bend and providing it was installed correctly it should have a connector that can be undone. If you undo this connector the pipe will pull away and generally this is where most blockages occur. Remove the blockage and reconnect the pipe.